Kenwood (2) KFC-W2511 10" Sub & (1) Kenwood KAC-8104D1000 Watt Amp (Bundle)(KEN2511-8104) and other affordable Car Subwoofers at 6ave.com.
his Custom Entertainment Solution bundle from Kenwood Audio features the Kenwood KAC-8104D 1000 Watt Class D Mono Power Amplifier and Kenwood's KFC-W2511 10" subwoofer. The Kenwood compact KAC-8104D mono amplifier features a rugged cast-aluminum chassis more than 30% smaller than its predecessor, yet it'll still punch out up to 500 watts RMS to your subwoofers without straining your car's electrical system. Kenwood's KFC-W2511 10" subwoofer offers excellent power handling, high efficiency, and stellar bass -- all with a classy appearance which sets it apart from the crowd. Get more substance with your style from this Kenwood's high-impact sub.
Kenwood KAC-8104D 1000 Watt Class D Mono Power Amplifier
MOS-FET Switching Power Supply / Parallel Connection
The amplifier utilizes a MOS-FET switching power supply providing thermal stability and efficient switching speeds guaranteeing performance and dependability. The amplifier is equipped with two pairs of gold-plated speaker terminals for an easy parallel subwoofer connection.
Infrasonic Filter
This amp features an 18dB/octave Infrasonic Filter. Ultra-low frequencies that cannot be reproduced by a subwoofer do not become sound but become unnecessary oscillations, which affect sound by causing distortion. These frequencies also waste amplifier power and can cause damage to speakers. Setting the Infrasonic filter switch to 15Hz or 25Hz cuts the frequencies below the respective frequency to improve the reproduction performance of the speakers by eliminating harmful distortion.
Mono-Power Amp Design / Class D Amplifier Design
The Kenwood KAC-8104D is designed with specific features to power your subwoofers with a frequency range between 5-200 Hz. This amplifier is not designed to power a full-range speaker. The KAC-8104D is a Class D mono-block amplifier, which uses digital switching to amplify audio signals. This design results in high efficiency and less heat.
Kenwood's KFC-W2511 10" subwoofer
Woofer
The cone is constructed of a stainless steel coated injection-molded polypropylene. The stainless steel coating adds to the polypropylene's strength and heat resistance characteristics resulting in reduced distortion and improved reliability.
Super Linear Spider
The woofer features a Super Linear Spider design. In this design, the Spider roll gradually becomes higher towards the center enabling this area to withstand more stress with less stretching. This design transfers up and down movement outward to reduce stretching the center area of the woofer. Because the spider's outward portion has more surface area to better dissipate stress from the center, this helps to reduce mechanical damage during increased excursion and enables the subwoofer to withstand more power.
Double Stacked Magnet / Spring Post Assembly
The stacked magnet assembly is used to create a powerful linear motor with increased excursion capability for superior bass output. The woofer features a compression input terminal assembly that will accept up to 8-gauge speaker wire.
Features included:
Kenwood KAC-8104D 1000 Watt Class D Mono Power Amplifier
Mono subwoofer amplifier
300 watts RMS x 1 at 4 ohms (500 watts x 1 at 2 ohms)
CEA-2006 compliant
Variable low-pass filter (50-200 Hz at 24 dB per octave)
Bass boost (0-18 dB at 40 Hz )
Subsonic filter (15/25 Hz, 18 dB/octave )
Class D design
Speaker-level inputs with signal sensing turn-on
Preamp-level inputs and outputs
Fuse rating: 40A x 1
8-gauge power and ground leads recommended -- wiring and hardware not included with amplifier
11-1/16"W x 2-3/8"H x 9-7/8"D
Kenwood's KFC-W2511 10" subwoofer
10" subwoofer with 4-ohm voice coil
Stainless steel-coated polypropylene cone with rubber surround
Power range: 50-300 watts RMS (1,000 watts peak power)
Frequency response: 30-1,000 Hz
Sensitivity: 90 dB
Mounting depth: 5-5/8"
Sealed box volume: 0.6-1.5 cu. ft.
Ported box volume: 0.75-1.75 cu. ft.
Recommended Q-Logic Box Type: 1, 2, 3