https://www.amazon.com/dp/B00MVRS38Q
WEme USB 3.0 to SATA IDE Adapter 2.5" 3.5" Hard Disk Drive Universal with One-Touch Backup function
Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!
original price :$28. 89
Code: PD01MST003
price: $18.49
Special offers for this item on Amazon product page:
Get 1 of WEme SATA IDE Hard Drive Adapter for $18.49 offered by WEME. Enter code PD01MST003 at checkout. Here's how (restrictions apply)
1 Comment
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank NoDa
Chipset info for those curious:
USB\VID_1F75&PID_0611\20210315
USB\VID_1F75&PID_0611&REV_0006
Innostor IS611
Also it's only $14.49 as there is a clippable $4 coupon on the product page as well.
Update: Even at $14.49 this is not a good deal. I am considering returning it, my first Amazon return ever.
Good:
- Thick 2' USB cable
- 3 in one connector
- Molex power to IDE drive instead of separate brick
- Power switch
Bad:
- You cannot connect 2x IDE's at the same time (a 3.5 and a 2.5) even with enough amperage from the power brick. It shuts down and will not show either drive. (Sata + 1x IDE will work but not all 3 even after I set the 3.5" to slave per instructions)
- As stated before, some programs hang when trying to communicate with it when a drive is in the SATA port, HDTune specifically hangs when trying to open, or when selecting that drive
- HDTune also reports a scrambled IDE drive model. e.g. ST3400362A become TS430063A2 where every other character is swapped.
- Perf on writes even on my largest (400GB) IDE 3.5" drive was abysmal -- only 14 MBps sequential when reads were 71 MBps.
- No S.M.A.R.T. info is transferred over IDE even to Crystal Disk Info
- Surprisingly, even with a super low power 2.5" SATA SSD, you still MUST use the power adapter for it to work. No other SATA adapter requires power for a small device with under 500ma draw.
An old dual 2.5/3.5 IDE only USB 3 Sabrent brand cable even got 17 MBps on sequential writes when compared with the same drive and partition and has no communication issues with any program accessing it.
I'm pretty sure this one is going back now after further testing. Very disappointed. I see that WeMe now has this branded as Alxum and looks identical (and sold by their "store"). I suspect they're all the same parts, but if anyone knows if there are different chipsets in these please post the details.
I've been very happy with other WeMe SATA and USB devices, but definitely not this one.