Did this coupon
work for you?
work for you?
Forum Thread
Sovol SV04 IDEX 3D Printer 300*300*400mm, Two Extruders, Automatic Bed Leveling $512
$512.00
There's currently an anniversary sale going on at Sovol. They have a $87 discount on the SV04 IDEX printer, so it costs $512 instead of $599.
The two independent extruders allow you to print models with two different filaments to create prints with multiple colors, print soluble support structures or just to double the print speed if you want to print the identical part or the same part mirrored.
Similar printers would be the Tenlog TL-D3 (more expensive) or the ones that Raise3D sells (way more expensive).
Besides the dual extruders, the SV04 also performs well as a normal 3d printer as well with ABL (automatic bed leveling), E3D Titan direct drive extruders, a modern 32Bit main board with silent stepper motor drivers and a removable, flexible build plate so you can get your prints off easily.
Technical Specifications
https://sovol3d.com/products/sv04...78338519
The two independent extruders allow you to print models with two different filaments to create prints with multiple colors, print soluble support structures or just to double the print speed if you want to print the identical part or the same part mirrored.
Similar printers would be the Tenlog TL-D3 (more expensive) or the ones that Raise3D sells (way more expensive).
Besides the dual extruders, the SV04 also performs well as a normal 3d printer as well with ABL (automatic bed leveling), E3D Titan direct drive extruders, a modern 32Bit main board with silent stepper motor drivers and a removable, flexible build plate so you can get your prints off easily.
Technical Specifications
- Extrusion Tech: Independent Dual Direct Drive Metal Extruder (IDEX)
- Build Size: 300mm x 300mm x 400mm
- Build Plate Dimension: 310mm*320mm
- Printer Dimensions: 653mm(L) *625mm(W) *803mm(H)(including filament holder)
- Layer Resolution: 0.1mm
- Positioning Accuracy: X/Y 0.012mm Z 0.001mm
- Supported Print Materials: PLA, TPU, TPE,HIPS, ABS, PETG, WOOD, PC, PA, PVA, ASA.
- Print Speed: 20~120mm/s(suggested 60mm/s)
- Stock Nozzle Diameter: 0.4 mm
- Operational Extruder Temperature: Max 260°C
- Input Formats: .STL, .OBJ, DAE, AMF
- Ambient Operating Temperature:8°C - 40°C / 46°F - 106°F
- Connectivity: SD Card or Data Cable
- 7 Step Motors: 1x 42-40, 4x 42-34, 2x 42-28
https://sovol3d.com/products/sv04...78338519
Created 05-19-2022
at 08:19 PM
by doubletoaster
in
3D Printers
(3)
If you purchase something through a post on our site, Slickdeals may get a small share of the sale.
Recommended Deal Alerts For You
What are Deal Alerts?
Want more deals like this?
Create a deal alert for 3D Printers.
Add Deal Alert for 3D Printers
More Computers Deals & Discounts
View AllFrontpage
$418.55
+ Free Shipping
35
69
Frontpage
$591.50
+ Free Shipping
36
89
Frontpage
$990
+ Free Shipping
57
141
Frontpage
$36
+ Free Shipping
34
68
5 Comments
Your comment cannot be blank.
Sign up for a Slickdeals account to remove this ad.
Other than the auto leveling, this is like the Tenlog TL-D3 which is a bit cheaper and has been around for a while means there are readily available parts, bugs and glitches have been ironed, there's a community and tried and tested.
It's not so hard to set it up, you just have to adjust the offset once.
Fair enough but I've had issues with older versions like this where the second head sometimes collided with parts or just didn't play nice.
I'm assuming manufacturers have ironed out those problems by now though. It's probably a worthwhile purchase for some. Just not for myself.
The FlashForge was much, much easier to set up and configure. But this one's size far surpasses the FlashForge.
I did send this one back because it had weird freezing issues, seemingly related to firmware, and updating the printer did not help.