Did this coupon
work for you?
work for you?
Product Name: | ONE+ 18V Cordless Rotary Tool with 2.0 Ah Battery and Charger |
Product Description: | RYOBI introduces the 18V ONE+ Cordless Rotary Tool with 2.0 Ah Battery and Charger. A variable speed dial allows users to reach up to 34,000 RPM for enhanced performance. With 33 included accessories and on-board accessory storage, the Rotary Tool delivers convenience while completing a variety of applications. The 36 in. flexible shaft pen design maximizes precision and comfort and the 1/8 in. collet accepts most accessories. With rubber feet to reduce slipping and integrated hanging keyholes, the ONE+ Rotary Tool is easy to use and easy to store. The included battery and charger are compatible with all RYOBI 18V ONE+ Tools. Best of all, it is part of the RYOBI ONE+ System of over 260 cordless tools that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, this Rotary Tool includes a 36 in. flexible shaft, 33 grinding/cutting/sanding/polishing accessories, an accessory storage case and an operator's manual. |
Model Number: | P460SB |
Product SKU: | 318303839 |
UPC: | 33287208722 |
The link has been copied to the clipboard.
34 Comments
Your comment cannot be blank.
Featured Comments
- I used it to cut porcelan tile. I bought small diamond cutting discs from Harbor Freight. It worked fine; it took a while but I was going slowly to be careful as these were some small features I was cutting out to fit a new railing post on some existing tiled steps.
- Yes, it bogs down a bit under load as one commenter said.
- I didn't find it overly loud as one commenter said, though yes it is louder than a direct drive handheld dremel with a big motor in your hand. I wear ear protection most of the time anyway. The blade cutting the tile and my shop vacuum running to catch the dust were significantly louder than the tool.
- Yes, it includes the P190 battery. It looks like a cheaper battery (of course, since the whole tool was only $40) and doesn't have a fuel gauge and doesn't charge particularly fast. This is my first Ryobi tool and I just needed something cheap and reasonable quality; most of my other tools are Makita/Dewalt/Festool and those are definitely higher quality and charge faster.
- It's targeting little craft uses like intricate sanding / shaping. It worked fine for the detailed tile cuts that I did but that was pushing its capabilities. I didn't mind spending more time. For bigger tasks I have a pneumatic die grinder and an electric angle grinder; I just felt that I couldn't do the fine/detailed work with those tools without wrecking something.
https://brickseek.com/home-depot-...=318303839
Brickseek link. Pulling product correctly, doesn't seem this package is sold everywhere. In the Cleveland area, I got zero results. In the Detroit area I got some but all were out of stock. Good luck!
They are normally more expensive than equivalent wired tools.
Batteries do not last forever and need to be replaced.
There is no one battery that fits all tools - different brands, voltages, capacities, chargers
Batteries add weight and bulk to hand tools
Some types of tools are simply not as good when battery powered (such as grinders or small table saws)
Batteries need time to charge.
Before buying a cordless tool you should be clear with yourself what you're actually gaining by going cordless because if you don't need the portability it might not be the best choice. Hardware stores want to sell you cordless tools because they know you'll be back for new batteries and you're getting locked into their brands. A good wired tool could last you a lifetime with minimal maintenance, but cordless tools are dependent on the future of their batteries.
Sign up for a Slickdeals account to remove this ad.
https://brickseek.com/home-depot-...=318303839
Brickseek link. Pulling product correctly, doesn't seem this package is sold everywhere. In the Cleveland area, I got zero results. In the Detroit area I got some but all were out of stock. Good luck!
https://brickseek.com/home-depot-...=318303839 [brickseek.com]
Brickseek link. Pulling product correctly, doesn't seem this package is sold everywhere. In the Cleveland area, I got zero results. In the Detroit area I got some but all were out of stock. Good luck!
Our community has rated this post as helpful. If you agree, why not thank CaptGeech
Had to look up Caveat Emptor. Had never heard of or read the expression before! Can't believe it. Happy to learn something new. Also learned there is possibly a reason this Ryobi is so cheap not bad if you can get it for 40ish, your needs are simple (maybe artistic) and you have good shooting range earmuffs lol
Sign up for a Slickdeals account to remove this ad.
Our community has rated this post as helpful. If you agree, why not thank paul123456789
- I used it to cut porcelan tile. I bought small diamond cutting discs from Harbor Freight. It worked fine; it took a while but I was going slowly to be careful as these were some small features I was cutting out to fit a new railing post on some existing tiled steps.
- Yes, it bogs down a bit under load as one commenter said.
- I didn't find it overly loud as one commenter said, though yes it is louder than a direct drive handheld dremel with a big motor in your hand. I wear ear protection most of the time anyway. The blade cutting the tile and my shop vacuum running to catch the dust were significantly louder than the tool.
- Yes, it includes the P190 battery. It looks like a cheaper battery (of course, since the whole tool was only $40) and doesn't have a fuel gauge and doesn't charge particularly fast. This is my first Ryobi tool and I just needed something cheap and reasonable quality; most of my other tools are Makita/Dewalt/Festool and those are definitely higher quality and charge faster.
- It's targeting little craft uses like intricate sanding / shaping. It worked fine for the detailed tile cuts that I did but that was pushing its capabilities. I didn't mind spending more time. For bigger tasks I have a pneumatic die grinder and an electric angle grinder; I just felt that I couldn't do the fine/detailed work with those tools without wrecking something.
I have a number of tools which I purchased 5+ years ago which I would now want in battery form, if I were to be purchasing them now (but I'm resisting the temptation to replace tools that I already have). In particular, a cordless track saw and a cordless oscillating tool would be great. Large power hungry stuff like roto-hammers and thinset mixers should still be purchased plug-in in my opinion. Also, there's limited utility to battery powered miter saws if your saw never leaves the workshop.
I have a number of tools which I purchased 5+ years ago which I would now want in battery form, if I were to be purchasing them now (but I'm resisting the temptation to replace tools that I already have). In particular, a cordless track saw and a cordless oscillating tool would be great. Large power hungry stuff like roto-hammers and thinset mixers should still be purchased plug-in in my opinion. Also, there's limited utility to battery powered miter saws if your saw never leaves the workshop.
- They are normally more expensive than equivalent wired tools.
- Batteries do not last forever and need to be replaced.
- There is no one battery that fits all tools - different brands, voltages, capacities, chargers
- Batteries add weight and bulk to hand tools
- Some types of tools are simply not as good when battery powered (such as grinders or small table saws)
- Batteries need time to charge.
Before buying a cordless tool you should be clear with yourself what you're actually gaining by going cordless because if you don't need the portability it might not be the best choice. Hardware stores want to sell you cordless tools because they know you'll be back for new batteries and you're getting locked into their brands. A good wired tool could last you a lifetime with minimal maintenance, but cordless tools are dependent on the future of their batteries.One thing to think about is that 18V batteries -> DC brushless motors are actually a better and cheaper electrical solution than cramming an AC motor (or an AC->DC rectifier) into a small handheld tool. I think it's also cheaper for the tool companies to release these low-voltage versions than it is to gain UL/CE approval for a new product which plugs into the wall, so that could result in cordless tools being cheaper. I believe the industry trend towards offering the tool for sale without batteries is an indication of this; the batteries are one of the most expensive pieces. So, perhaps now or in the near future one could save money if multitasking their existing batteries or if $/kWh for quality tool batteries come down to competitive prices. I agree that you have to consider batteries and their lifetime.
For my $0.02, I have 3 Makita batteries which have never been replaced and they work great after ~5 years. I'm a weekday/weekend project warrior type, so not doing this professionally every day. But I'm charging a tool battery every week or so
- They are normally more expensive than equivalent wired tools.
- Batteries do not last forever and need to be replaced.
- There is no one battery that fits all tools - different brands, voltages, capacities
- Batteries add weight and bulk to hand tools
- Some types of tools are simply not as good when battery powered (such as grinders or small table saws).
Before buying a cordless tool you should be clear with yourself what you're actually gaining by going cordless because if you don't need the portability it might not be the best choice. Hardware stores want to sell you cordless tools because they know you'll be back for new batteries and you're getting locked into their brands. A good wired tool could last you a lifetime with minimal maintenance, but cordless tools are dependent on the future of their batteries.This is false.
Electrically, the only Ryobi batteries in the 18v line that allow for any difference in performance are the ones with additional tabs to provide more amperage to the tool (HP/HP+).
They retain compatibility with tools that don't support HP/HP+ (typically brushed tools) by keeping the primary tab placement in the same spot. Those additional tabs connect to nothing.
Notice how all of the tools in the 18v line still run at 18v max. Varying this voltage will affect the speed of the motor, not the torque. The other part of the equation, the amperage, is limited by the tool, not the battery. If any battery failed to output enough amperage, the tool would not run.
The only other rating on the battery is aH. This is a factor of longevity, not performance.
Simply put: If you want a more powerful tool, you have to either buy an HP+ or go corded. However, if you're looking for longer run time, slap on a bigger battery or go brushless.